Contents

Basic IP forwarding commands· 1

display fib· 1

ip forwarding-table save· 3

Load sharing commands· 4

bandwidth-based-sharing· 4

display ip load-sharing mode· 4

ip load-sharing mode· 5

 

Basic IP forwarding commands

display fib

Use display fib to display FIB entries.

Syntax

display fib [ topology topology-name | vpn-instance vpn-instance-name ] [ ip-address [ mask | mask-length ] ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

topology topology-name: Specifies a topology by its name, a case-sensitive string of 1 to 31 characters. To specify a public topology, use base as the topology name. To display FIB entries for the public network, do not specify this option.

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. To display the FIB entries for the public network, do not specify any VPN instance.

ip-address: Displays the FIB entry that matches the specified destination IP address.

mask: Specifies the mask for the IP address.

mask-length: Specifies the mask length for the IP address. The value range is 0 to 32.

Usage guidelines

If you specify an IP address without a mask or mask length, this command displays the longest matching FIB entry.

If you specify an IP address and a mask or mask length, this command displays the exactly matching FIB entry.

Examples

# Display FIB entries for topology mt.

<Sysname> display fib topology mt

 

Route destination count: 6

Directly-connected host count: 0

 

Flag:

  U:Usable   G:Gateway   H:Host   B:Blackhole   D:Dynamic   S:Static

  R:Relay     F:FRR

 

Destination/Mask   Nexthop         Flag     OutInterface/Token       Label

0.0.0.0/32         127.0.0.1       UH       InLoop0                  Null

127.0.0.0/8        127.0.0.1       U        InLoop0                  Null

127.0.0.0/32       127.0.0.1       UH       InLoop0                  Null

127.0.0.1/32       127.0.0.1       UH       InLoop0                  Null

127.255.255.255/32 127.0.0.1       UH       InLoop0                  Null

255.255.255.255/32 127.0.0.1       UH       InLoop0                  Null

# Display all FIB entries of the public network.

<Sysname> display fib

 

Route destination count: 5

Directly-connected host count: 0

 

Flag:

  U:Usable   G:Gateway   H:Host   B:Blackhole   D:Dynamic   S:Static

  R:Relay     F:FRR

 

Destination/Mask   Nexthop         Flag     OutInterface/Token       Label

0.0.0.0/32         127.0.0.1       UH       InLoop0                  Null

1.1.1.0/24         192.168.126.1   USGF     MGE0/0/0                Null

127.0.0.0/8        127.0.0.1       U        InLoop0                  Null

127.0.0.0/32       127.0.0.1       UH       InLoop0                  Null

127.0.0.1/32       127.0.0.1       UH       InLoop0                  Null

# Display the FIB entries for VPN vpn1.

<Sysname> display fib vpn-instance vpn1

 

Route destination count: 5

Directly-connected host count: 0

 

Flag:

  U:Usable   G:Gateway   H:Host   B:Blackhole   D:Dynamic   S:Static

  R:Relay     F:FRR

 

Destination/Mask   Nexthop         Flag     OutInterface/Token      Label

0.0.0.0/32         127.0.0.1       UH       InLoop0                  Null

20.20.20.0/24      20.20.20.25     U        MGE0/0/0                Null

20.20.20.0/32      20.20.20.25     UBH      MGE0/0/0                Null

20.20.20.25/32     127.0.0.1       UH       InLoop0                  Null

20.20.20.25/32     20.20.20.25     H        MGE0/0/0                Null

20.20.20.255/32    20.20.20.25     UBH      M-GE0/0/0                Null

# Display the FIB entries matching the destination IP address 10.2.1.1.

<Sysname> display fib 10.2.1.1

 

FIB entry count: 1

 

Flag:

  U:Usable   G:Gateway   H:Host   B:Blackhole   D:Dynamic   S:Static

  R:Relay     F:FRR

 

Destination/Mask   Nexthop         Flag     OutInterface/Token       Label

10.2.1.1/32        127.0.0.1       UH       InLoop0                  Null

Table 1 Command output

Field	Description
Route destination count	Number of route to destination address.
Directly-connected host count	Number of directly-connected hosts that are learned through features such as ARP.
FIB entry count	Total number of FIB entries.
Destination/Mask	Destination address and the mask length.
Nexthop	Next hop address.
Flag	Flags of routes: ·     U—Usable route. ·     G—Gateway route. ·     H—Host route. ·     B—Blackhole route. ·     D—Dynamic route. ·     S—Static route. ·     R—Relay route. ·     F—Fast reroute.
OutInterface/Token	Output interface/LSP index number.
Label	Inner label.

 

ip forwarding-table save

Use ip forwarding-table save to save the IP forwarding entries to a file.

Syntax

ip forwarding-table save filename filename

Views

Any view

Predefined user roles

network-admin

Parameters

filename filename: Specifies the name of a file, a string of 1 to 255 characters. For information about the filename argument, see Fundamentals Configuration Guide.

Usage guidelines

The command automatically creates the file if you specify a nonexistent file. If the file already exists, this command overwrites the file content.

To automatically save the IP forwarding entries periodically, configure a schedule for the device to automatically run the ip forwarding-table save command. For information about scheduling a task, see Fundamentals Configuration Guide.

Examples

# Save the IP forwarding entries to the fib.txt file.

<Sysname> ip forwarding-table save filename fib.txt

Load sharing commands

bandwidth-based-sharing

Use bandwidth-based-sharing to enable IPv4 load sharing based on bandwidth.

Use undo bandwidth-based-sharing to disable IPv4 load sharing based on bandwidth.

Syntax

bandwidth-based-sharing

undo bandwidth-based-sharing

Default

The IPv4 load sharing based on bandwidth is disabled.

Views

System view

Predefined user roles

network-admin

Usage guidelines

This feature load shares flow traffic among multiple output interfaces based on their load percentages. The device calculates the load percentage for each output interface in terms of their expected bandwidths.

Devices that run load sharing protocols, such as Locator/ID Separation Protocol (LISP), implement load sharing based on the ratios defined by these protocols.

Examples

# Enable IPv4 load sharing based on bandwidth.

<Sysname> system-view

[Sysname] bandwidth-based-sharing

display ip load-sharing mode

Use display ip load-sharing mode to display the load sharing mode in use.

Syntax

display ip load-sharing mode slot slot-number

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member device, this command displays the load sharing mode for all member devices.

Examples

# Display the load sharing mode in use.

<Sysname> display ip load-sharing mode slot 1

Load-sharing mode: per-flow

Load-sharing options: dest-ip | src-ip | ip-pro | dest-port | src-port

Load-sharing algorithm: 0

IP tunnel load-sharing mode: outer

Table 2 Command output

Field	Description
Load-sharing mode	Per-flow load sharing.
Load-sharing options	Options configured for load sharing: ·     dest-ip—Identifies flows by packet's destination IP address. ·     src-ip—Identifies flows by packet's source IP address. ·     ip-pro—Identifies flows by packet's IP protocol. ·     dest-port—Identifies flows by packet's destination port number. ·     src-port—Identifies flows by packet's source port number.
Load-sharing algorithm	Algorithm used by load sharing.
IP tunnel load-sharing mode	This field is not supported in the current software version. Load sharing for IP tunnel packets: ·     all—Identifies flows by inner and outer IP header information. ·     inner—Identifies flows by inner IP header information. ·     outer—Identifies flows by outer IP header information.

 

Related commands

ip load-sharing mode

ip load-sharing mode

Use ip load-sharing mode to configure the load sharing mode.

Use undo ip load-sharing mode to restore the default.

Syntax

ip load-sharing mode per-flow [ dest-ip | dest-port | ip-pro | src-ip | src-port ] * { global | slot slot-number }

undo ip load-sharing mode [ per-flow ] { global | slot slot-number }

Default

The device performs per-flow load sharing.

Views

System view

Predefined user roles

network-admin

Parameters

per-flow: Implements per-flow load sharing. If you specify none of the destination IP address, destination port number, source IP address, and source port number, the device performs per-flow load sharing based on the destination IP address and the source IP address of the packets.

dest-ip: Identifies flows by destination IP address.

dest-port: Identifies flows by destination port.

global: Configures the load sharing mode globally.

ip-pro: Identifies flows by protocol number.

src-ip: Identifies flows by source IP address.

src-port: Identifies flows by source port.

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member device, this command configures the load sharing mode for all member devices.

Examples

# Configure per-flow load sharing by destination IP address and source IP address on slot 1.

<Sysname> system-view

[Sysname] ip load-sharing mode per-flow dest-ip src-ip slot 1