Description

This software is used to upgrade the hREST version

Installation steps

Publish Description

Restrictions and cautions

Usage limit

None.

Restrictions and guidelines

None.

Version information

Version number

Version number: 1.25

Target file name and MD5 checksum of this version:

RS3M2C9S601.25.zip: 5378c0bc3a40f4e834c8aa86bbe3456c

Version history

Table 1 Version history

Software operating environments

Windows system

Windows 2012 R2,Windows 2019,Windows 2022, Windows7, and Windows10

Linux operating systems

CentOS6.2 and CentOS7.3,Redhat8.8,Redhat9.0,Rocky 9.0

Hardware and software compatibility matrix

As a best practice, use this version with HDM-1.30.15 and later versions. Some features have special requirements for the version, which will be explained in hREST User Guide.

hREST is only applicable to the published generic HDM versions and does not support customized HDM versions.

Upgrade restrictions and guidelines

None.

Problems Solved

New Functions

Version:1.27(2025/4/14)

Upgrade recommendations

Optional Upgrade

Problems Solved

None.

None.

None.

202311092141

Symptom: Using a time parameter that is not within the legal range to set the service configuration timeout, the command returns a successful setup, but it does not take effect in reality.

Condition: This symptom might occur if you use a time parameter that is not within the legal range to set the service configuration timeout.

202212290424

Symptom: Using hREST to obtain memory information in-band and out-of-band from the same server, the numerical slot number information displayed is inconsistent.

Condition: This symptom might occur if you use hREST to obtain memory information in-band and out-of-band from the same server.

202212300467

Symptom: When using the hREST tool to query the firmware information of the R4900 G3 server with HDM B02 version, an error is reported in the query result.

Condition: This symptom might occur if you use hREST to query the firmware information of R4900 G3 server with HDM B02 version.

202212141224

Symptom: After querying the BMC version of HDM B01 using hREST, then querying the BMC version of HDM B03, the two returned fields do not match.

Condition: This symptom might occur if you use hREST to query the BMC version of HDM B01, and then query the BMC version of HDM B03.

202211280849

Symptom: Using hREST to send an SMTP setting command without any parameters, the command returns a success result.

Condition: This symptom might occur if you use hREST to send an SMTP setting command without any parameters.

202209231015

Symptom: When you update the HDM version of R4900 G3 server to B02 version, setting SNMPTrap fails.

Condition: This symptom might occur if you update the R4900 G3 server HDM version to B02 version.

202209011319

Symptom: After modifying the HDM network configuration, when using the LDAP domain account to issue an hREST command, an error of incorrect username or password is reported.

Condition: This symptom might occur if you use an LDAP domain account to issue hREST commands after modifying the HDM network configuration.

202207041392

Symptom: On a server with modified BIOS configuration, using utool to restore the factory settings, the tool indicates a successful recovery, but it actually does not take effect.

Condition: This symptom might occur when you use utool to restore the factory configuration on a server with modified BIOS settings.

202205050570

Symptom: When you configure SNMP functionality for the R4900 G3 server switched to mobile CID using hREST, the operation fails.

Condition: This symptom might occur if you configure SNMP function using hREST for the R4900 G3 server switched to mobile CID.

202205111554

Symptom: After you change the web port number of the server to non-default value 443 and send commands with the modified port number using hREST, some functions become unavailable.

Condition: This symptom might occur if you change the web port number of the server to the non-default value 443 and send the command using the modified port number with hREST.

202204160453

Symptom: When you set the SNMP Trap version to v3 using the hRest tool, an attempt to set the alarm Trap server again fails.

Condition: This symptom might occur if you use the hREST tool with SNMP Trap version set to v3, and then configure the alarm Trap server.

202202211286

Symptom: Using the hREST tool to obtain fan information for the 6900 G5 server, the number of fans is inconsistent with the actual display on the HDM page.

Condition: This symptom might occur if you use the hREST tool to obtain fan information for the 6900 G5 server.

202111231680

Symptom: Using hREST tool to delete logical volumes on server's LSI controller, the system reports and error but the actual logical volume has been successfully deleted.

Condition: This symptom might occur if you use the hREST tool to delete logical volumes on the server's LSI controller.

202111230229

Symptom: Under the Windows system, when hREST uses an IPV6 address to obtain HDM information, it reports an "address unreachable" error.

Condition: This symptom might occur if hREST under Windows system uses an IPV6 address to obtain HDM information.

202109220904

Symptom: Before hREST-1.14, there were occasional data corruption under certain impact processes (around 2000 packets/second).

Condition: This symptom might occur under certain impacts of the hREST-1.14 version (around 2000 packets per second).

202105080860

Symptom: Using hREST to upgrade BMC firmware version, after the upgrade, the previous version is displayed as None.

Condition: This symptom might occur if you upgrade the BMC firmware using hREST.

202102040356

Symptom: When you obtain PCIE information through hREST, the slot number and manufacturer name are displayed as None.

Condition: This symptom might occur if you get PCIE information through hREST.

202012160057

Symptom: When you use hREST to collect SDS logs with HDM2.18 version, the collection of SDS logs fails.

Condition: This symptom might occur if you use hREST with the HDM2.18 version to collect SDS logs.

New Functions

Version:1.26(2025/3/5)

Upgrade recommendations

Optional Upgrade

Problems Solved

None.

None.

202311092141

Symptom: Using a time parameter that is not within the legal range to set the service configuration timeout, the command returns a successful setup, but it does not take effect in reality.

Condition: This symptom might occur if you use a time parameter that is not within the legal range to set the service configuration timeout.

202212290424

Symptom: Using hREST to obtain memory information in-band and out-of-band from the same server, the numerical slot number information displayed is inconsistent.

Condition: This symptom might occur if you use hREST to obtain memory information in-band and out-of-band from the same server.

202212300467

Symptom: When using the hREST tool to query the firmware information of the R4900 G3 server with HDM B02 version, an error is reported in the query result.

Condition: This symptom might occur if you use hREST to query the firmware information of R4900 G3 server with HDM B02 version.

202212141224

Symptom: After querying the BMC version of HDM B01 using hREST, then querying the BMC version of HDM B03, the two returned fields do not match.

Condition: This symptom might occur if you use hREST to query the BMC version of HDM B01, and then query the BMC version of HDM B03.

202211280849

Symptom: Using hREST to send an SMTP setting command without any parameters, the command returns a success result.

Condition: This symptom might occur if you use hREST to send an SMTP setting command without any parameters.

202209231015

Symptom: When you update the HDM version of R4900 G3 server to B02 version, setting SNMPTrap fails.

Condition: This symptom might occur if you update the R4900 G3 server HDM version to B02 version.

202209011319

Symptom: After modifying the HDM network configuration, when using the LDAP domain account to issue an hREST command, an error of incorrect username or password is reported.

Condition: This symptom might occur if you use an LDAP domain account to issue hREST commands after modifying the HDM network configuration.

202207041392

Symptom: On a server with modified BIOS configuration, using utool to restore the factory settings, the tool indicates a successful recovery, but it actually does not take effect.

Condition: This symptom might occur when you use utool to restore the factory configuration on a server with modified BIOS settings.

202205050570

Symptom: When you configure SNMP functionality for the R4900 G3 server switched to mobile CID using hREST, the operation fails.

Condition: This symptom might occur if you configure SNMP function using hREST for the R4900 G3 server switched to mobile CID.

202205111554

Symptom: After you change the web port number of the server to non-default value 443 and send commands with the modified port number using hREST, some functions become unavailable.

Condition: This symptom might occur if you change the web port number of the server to the non-default value 443 and send the command using the modified port number with hREST.

202204160453

Symptom: When you set the SNMP Trap version to v3 using the hRest tool, an attempt to set the alarm Trap server again fails.

Condition: This symptom might occur if you use the hREST tool with SNMP Trap version set to v3, and then configure the alarm Trap server.

202202211286

Symptom: Using the hREST tool to obtain fan information for the 6900 G5 server, the number of fans is inconsistent with the actual display on the HDM page.

Condition: This symptom might occur if you use the hREST tool to obtain fan information for the 6900 G5 server.

202111231680

Symptom: Using hREST tool to delete logical volumes on server's LSI controller, the system reports and error but the actual logical volume has been successfully deleted.

Condition: This symptom might occur if you use the hREST tool to delete logical volumes on the server's LSI controller.

202111230229

Symptom: Under the Windows system, when hREST uses an IPV6 address to obtain HDM information, it reports an "address unreachable" error.

Condition: This symptom might occur if hREST under Windows system uses an IPV6 address to obtain HDM information.

202109220904

Symptom: Before hREST-1.14, there were occasional data corruption under certain impact processes (around 2000 packets/second).

Condition: This symptom might occur under certain impacts of the hREST-1.14 version (around 2000 packets per second).

202105080860

Symptom: Using hREST to upgrade BMC firmware version, after the upgrade, the previous version is displayed as None.

Condition: This symptom might occur if you upgrade the BMC firmware using hREST.

202102040356

Symptom: When you obtain PCIE information through hREST, the slot number and manufacturer name are displayed as None.

Condition: This symptom might occur if you get PCIE information through hREST.

202012160057

Symptom: When you use hREST to collect SDS logs with HDM2.18 version, the collection of SDS logs fails.

Condition: This symptom might occur if you use hREST with the HDM2.18 version to collect SDS logs.

New Functions

Version:1.25(2024/7/24)

Upgrade recommendations

Optional Upgrade

Problems Solved

New Functions

Version:1.24(2023/12/11)

Upgrade recommendations

Optional Upgrade

Problems Solved

New Functions