登录

欢迎user新华三退出

国家 / 地区

  • 产品与解决方案
  • 行业解决方案
  • 服务
  • 支持
  • 合作伙伴
  • 新华三人才研学中心
  • 关于我们
首页 支持 文档与软件 软件下载 服务器

NIC-metaScale-50-LP-2P-25G(2025/7/21)

类型：

Firmware-NIC

版本：

v1.2.0+432

操作系统：

N/A-N/A

    说明

  • 说明
  • 安装步骤
  • 发布说明
  • 解决问题
  • 新增功能
  • 历史版本

  • 说明

    This software is the firmware upgrade program for yunsilicon metaScale network card version v1.2.0+432.

  • 安装步骤

    Restrictions and guidelines

    1.Before updating the software version, it is strongly recommended that you understand the software feature changes between versions, evaluate the possible impact of the changes on the business, and refer to the relevant supporting documents.

    2.This firmware version of Legacy PXE does not support 64 bit bar space.

    3.This firmware version of Legacy PXE does not support IPv6.

    Installation steps

    Linux OS

    1.Log in to the system with an administrator account.

    2.Upload the corresponding firmware file mcr_xxx_x86_kernel_ xxx. tar.gz to the system.

    3.Execute the following commands:

    tar -zxvf mcr_xxx_x86 _ xxx.tar.gz ##Decompress the firmware package.

    cd mcr_xxx_x86 _ xxx/fw_hw/ ##Enter the fw_hw directory of the decompressed firmware package

    4.Execute the command ./yun_upgrade.sh -e 01:00.0 to upgrade the firmware of target NIC.

    Note:

    ①01:00.0 refers to the bus number of target NIC port 0. Without the -e 01:00.0 parameter, the firmware of all yunsilicon metaScale NICs on the server will be updated.

    ②If the firmware update process prompts a failure to operate the configuration file, the error content is shown in the following figure. Please move the firmware file mcr_xxx_x86_ xxx. tar.gz to the/var/log path, and then perform steps (3) - (4) to update the firmware.

    图片 2

    5.After the firmware upgrade is successful, restart the system to make the new firmware effective.

    6.After re-entering the system, execute the command ethtool -i ethx (ethx is the name of the network port) to check that the NIC firmware version is the target version.

    Note: The supporting driver must be at least version 1.2.0.367.H460 in order for the OS to display the network port properly.

    Windows OS

    1.Not supported.

    VMware OS

    1.Not supported.

  • 发布说明

    Supported products

    H3C UniServer B5700 G3

    H3C UniServer B5700 G5

    H3C UniServer B5800 G3

    H3C UniServer B7800 G3

    H3C UniServer E3200 G3

    H3C UniServer R2700 G3

    H3C UniServer R2900 G3

    H3C UniServer R4300 G3

    H3C UniServer R4300 G5

    H3C UniServer R4330 G5

    H3C UniServer R4330 G5 H3

    H3C UniServer R4500 G3

    H3C UniServer R4700 G3

    H3C UniServer R4700 G5

    H3C UniServer R4700 G6

    H3C UniServer R4900 G3

    H3C UniServer R4900 G5

    H3C UniServer R4900 G6

    H3C UniServer R4900 G6 Ultra

    H3C UniServer R4930 G5

    H3C UniServer R4930 G5 H3

    H3C UniServer R4950 G5

    H3C UniServer R4950 G5 Milan

    H3C UniServer R4950 G5 Rome

    H3C UniServer R4950 G6

    H3C UniServer R5300 G3

    H3C UniServer R5300 G5

    H3C UniServer R5500 G5 AMD

    H3C UniServer R5500 G5 Intel

    H3C UniServer R6700 G3

    H3C UniServer R6900 G3

    H3C UniServer R8900 G3

    H3C UniServer R5350 G6

    H3C UniServer R6900 G5

    H3C UniServer R5500 G6 AMD

    H3C UniServer R5500 G6 Intel

    H3C UniServer R5300 G6

    H3C UniServer R5500LC G5 Intel

    H3C UniServer R5500 G5 HYGON

    H3C UniServer B5700 G6

    H3C UniServer R4900LE G6 Ultra

    H3C UniServer R4700LE G6

    H3C UniServer R4900LC G5

    H3C UniServer R4700LC G5

    H3C UniServer R4930LC G5 H3

    H3C UniServer R4300 G6

    H3C UniServer R4500 G6

    H3C UniServer R6700 G6

    H3C UniServer R6900 G6

    H3C UniServer R5330 G7

    H3C UniServer R5500 G7 Hygon

    H3C UniServer R4930 G7

    H3C UniServer E3300 G6

    H3C UniServer R3950 G6

    H3C UniServer R4330 G7

    H3C UniServer R4950 G7

    H3C UniServer R3950 G7

    H3C UniServer R3350 G7

    H3C UniServer R4900 G7

    H3C UniServer R4700 G7

    H3C UniServer R3900 G7

    H3C UniServer R4300 G7

    Restrictions and guidelines

    1.Before updating the software version, it is strongly recommended that you understand the software feature changes between versions, evaluate the possible impact of the changes on the business, and refer to the relevant supporting documents.

    2.This firmware version of Legacy PXE does not support 64 bit bar space.

    3.This firmware version of Legacy PXE does not support IPv6.

  • 解决问题

    1.Fix the abnormal ifconfig packet loss caused by the LLDP service shutdown on the server.

    2.Resolve the issue of the UN-NIC-metaConnect-400S-400Gb-1P network card dropping.

  • 新增功能

    1.Added a list of AOC module adaptation for metaScale series smart network cards.

    2.Add MAD (Media Auto Detect).

新华三官网
联系我们