登录

欢迎user新华三退出

国家 / 地区

  • 产品与解决方案
  • 行业解决方案
  • 服务
  • 支持
  • 合作伙伴
  • 新华三人才研学中心
  • 关于我们
首页 支持 文档与软件 软件下载 服务器

R4500 G6 BIOS(2024/11/19)

类型：

Firmware-BIOS

版本：

6.10.46

操作系统：

N/A-N/A

    说明

  • 说明
  • 安装步骤
  • 发布说明
  • 解决问题
  • 新增功能
  • 历史版本

  • 说明

    This software is used to upgrade the BIOS version of the R4500 G6 server

  • 安装步骤

  • 发布说明

    Restrictions and cautions

    Restrictions

    The configuration import function is not available for upgrading the BIOS from a lower version to BIOS-6.00.20 and higher on HDM due to compatibility issues, but is available for upgrades from BIOS-6.00.20 and higher.

    To avoid server startup errors, do not use the AFU tool to downgrade the BIOS from BIOS-6.10.XX to BIOS-6.00.XX with the user-configured settings retained.

    BIOS-6.00.XX does not support EMR processor upgrade or downgrade on dual-processor servers.

    Guidelines

    To avoid BIOS boot failures, do not upgrade or reset HDM during BIOS boot.

    If the system encounters a black screen and cannot boot after the BIOS firmware upgrade and restart, it may be caused due to the HDM firmware not being compatible. To resolve this issue, upgradeHDM to the version of the corresponding model as shown in Table 4.

    Table 4 HDM firmware version for servers

    Product model

    HDM firmware version

    H3C UniServer R4900 G6 Ultra, R4900/R4900LE G6, R4700/R4700LE G6

    HDM2-1.24 or later

    H3C UniServer R5300 G6/R5500 G6(Intel)/R6700 G6/R6900 G6

    HDM2-1.60 or later 

    H3C UniStor X10000 G6/X18000 G6

    HDM2-1.63 or later 

     

    As from the BIOS-6.10.38 for R6700 G6/R6900 G6, the signed firmware version is expanded to 26 M and requires an update in conjunction with HDM2-1.70 or above.

    If a server equipped with Intel S4510 & S4520 SATA M.2 SSDs loses drives after a DC cold reboot, update the BIOS firmware to version 6.10.43 or later and perform an AC power cycle.

    Version information

    Version number

    Version 6.10.46

    Table 1 Target file name and MD5 checksum

    Model

    File name and MD5 checksum

    H3C UniServer R4500 G6

    C35-BIOS-6.10.46-signed.bin: 971b2b884b2a47b5754eaac95401e12a

     

    You can access the HDM Web interface of the server to identify the BIOS firmware version in the Device information section of the Dashboard > Summary page, as shown in Figure 1.

    Figure 1 Viewing the BIOS version number from HDM

    图片 1

     

    BIOS built-in software version

    Table 2 EMR&SPR CPU BIOS built-in software version

    Item

    Version

    Microcode

    EMR Production A* / R* Step: m_87_c06f2_21000283.pdb;

    SPR Production E* / S* Step: m_87_806f8_2b000603.pdb;

    SPR HBM Production B* Step: m_10_806f8_2c0003d3.pdb;

    Intel BKC Version

    2024_uPLR2_OOB (KIT #829554)

    RC Code

    111.D23

    ME Firmware

    SPS_E5_06.01.04.047.0

    RSTe PreOS Components

    v8.5.0.1096

    VMD VROC

    v8.5.0.1096

    BIOS ACM

    v1.1.A

     

    Supported languages

    English

    Chinese

    Supported devices

    H3C UniServer R4500 G6

    Hardware and software compatibility matrixes

    CAUTION:

    To avoid update failure, verify the hardware and software compatibility before performing an update.

     

    Table 3 Hardware and software compatibility matrix for H3C UniServer R4500 G6

    Item

    Specifications

    Product family

    H3C UniServer R4500 G6

    HDM

    HDM2-2.08 and later

    CPLD

    V002 and later

    iMC

    N/A

     

    Update suggestions

    This version is recommended.

    Update restrictions and guidelines

    Make sure the software versions are compatible with each other.

    To update both HDM and the BIOS, update HDM first.

    Make sure the server is running in stable state before the update. That is, the server is powered off or has entered the operating system.

    If the server enters the OS before the update, you must power cycle the server for the new firmware to take effect.

    If you select the Retain or Restore method to update the BIOS, the update occurs during POST after the server is powered on again. During the update, do not disconnect the power source from the server, or forcedly power off or restart the server.

    If you select the Forcedly restore method to update the BIOS, do not disconnect the power source from the server, or power off or restart the server.

    Selecting the Restore or Forcedly restore method will restore the default BIOS settings, including restoring the boot mode in the BIOS to the default (UEFI).

    During BIOS update with Forcedly restore selected, writing BIOS data, such as restarting the system or saving BIOS configuration from the BIOS setup utility, can cause data write errors. This can lead to BIOS ROM integrity check failures and even system starting failures. If the system prompts Flash Image Broken! System Halt!, forcedly power off the server, and then try to update the BIOS with Forcedly restore selected again.

    As a best practice of bulk update, make sure you can update one server successfully before you update the remaining servers.

  • 解决问题

    Resolved problems in BIOS-6.10.46

    202409131230

    Symptom: After you install BCLinux, the Exit screen displays the two same boot options.

    Condition: This symptom might occur if you install BCLinux.

    202408271114

    Symptom: You can scan the QR code in the BIOS setup utility for the generic model to go to the link for the official manual.

    Condition: N/A

  • 新增功能

新华三官网
联系我们